Why Choose Centrifugal Casting?

by Gibson Centritech Limited | Oct 22, 2018 | Blog

Gibson Centri Tech Limited GML (Babbitt) Range of Centrifugal Casting Machines

by Gibson Centritech Limited | Oct 22, 2018 | Blog

The GML centrifugal casting machines are used by leading manufacturers world wide for the lining of all types of bearings including: Rolling Mill Power Generation Tank Stern Tubes These machines are specifically designed to safely and economically cast white metal...

“We are trying to improve our production range of centrifugal rolls. Please advise the best centrifugal casting machine and procedure we would need to approach to achieve our desired results”

by Gibson Centritech Limited | Oct 15, 2018 | Blog

Gibson Centri Tech Limited would first propose to initially offer a preliminary technical study covering the following points: Review the selected cast products required to establish their suitability for centrifugal casting and equipment type. To establish suitable...

“We are producing centrifugal castings for cylinder liners. Please advise on which mould coating would be most suitable for our production needs”

by Gibson Centritech Limited | Oct 15, 2018 | Blog

Gibson Centri Tech Limited produce a range of silica and alumina coating. However, if we feel our coating is not the best product for you we will recommend an alternative supplier. Over the years silica coating has been a popular product for use in the manufacture of...

“We are considering having an annual service on our machine, is this a service that Gibson Centri Tech Limited can offer?”

by Gibson Centritech Limited | Oct 15, 2018 | Blog

Do you need a different machine for ferrous and non-ferrous centrifugal castings?

by Gibson Centritech Limited | Oct 12, 2018 | Blog

The Short answer is no, the machine does not mind which material is being poured. There can be difference in the mould design depending on the liquidus temperature and wall thickness of the casting being produced.